Search
1.00mm RF Series
 |
The 1mm connector was designed for mode-free operation through 110GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the other millimeter wave connectors, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1 mm interface uses an M4 x 0.7 thread. |
1mm
| Impedance (Ω) | 50 |
| Frequency GHz | 110 GHz |
| Shielding Effectiveness | ≥ -90 dB |
| Dielectric withstanding Voltage | 250 VRMS |
| Mating Cycles | 500 |
| Mating Torque | 3-5 in-lbs |
| Temperature Rating | -65°C to +165°C |
| Corrosion (salt spray) | MIL-STD-202, Method 101, Condition B |
| Vibration | MIL-STD-202, Method 204, Condition D |
| Shock | MIL-STD-202, Method 213, Condition I |
| Thermal Shock | MIL-STD-202, Method 107, Condition B |
| Moisture Resistance | MIL-STD-202, Method 106, Less Step 7B |
| Barometric Pressure (Altitude) | MIL-STD-202, Method 105, Condition C, 70k Ft. |